Advertisement
image_pdfimage_print

KAIST virtual roughness study

As it can be verified in the presented results, it is possible to analyze in several levels of detail, allowing comparisons and assumptions that are not easily determined by the simple analysis of global coefficients. The other form of analysis used in this work is the comparison of data through the newly proposed analysis tools. Table 1 presents the results (Raavg, Ramin, Ramax e Raadv), obtained by comparing coefficients on all surfaces of each block and also on all surfaces of all. The comparison of results obtained at different temperatures indicates to the engineering professional a metric to determine which process to adopt, according to the desired roughness level. In order to evaluate surface roughness coefficients, are proposed the analysis of both the detail levels of the quadtree divisions and the comparison between surfaces by analyzing the developed evaluation metrics (signature, histogram, and roughness graph). These methods allow only a qualitative assessment of the roughness coefficients.

As illustrated in Figure 6, the greater the height of the wave peak, the closer the ellipse’s center was to the peak. Finally, each cluster was fitted to an ellipse shape with the same major and minor axes by means of the ellipse fitting algorithm. At the micron scale, although data science the influence of light source noise is reduced, the grinding surface images of different roughness levels may be highly similar. In this section, we will construct an optical imaging system capable of eliminating interferometric signal, then establish a mathematical model for the grinding surface, and finally establish a correlation between image pixel point brightness and surface roughness. The datasets that were generated and/or analysed during the current study are freely available from the corresponding author on a request.

Sci-Tech NOW KAIST develops VR collaboration tech that visually shares touch – DongA Science

Sci-Tech NOW KAIST develops VR collaboration tech that visually shares touch.

Posted: Tue, 03 Nov 2026 08:00:00 GMT source

In many setups, one user may possess a haptic device that delivers vibrations to the fingertips, allowing them to feel an object’s texture, while a partner without such hardware must rely solely on visual cues. A research team from the Korea Advanced Institute of Science and Technology (KAIST) has developed a visual technique that allows users in virtual reality (VR) to perceive the roughness of https://aicurated.com/computer-vision-and-perception/kaist-makes-virtual-roughness-visible-for-shared-vr-tasks/ objects without haptic devices. The author(s) declare that financial support was received for the research, authorship, and/or publication of this article.

  • Nevertheless, it is evident that the precision of the index function prediction exhibits fluctuations within the narrow range of roughness levels, spanning from 0.3 ?m to 0.5 ?m.
  • The author(s) declare that financial support was received for the research, authorship, and/or publication of this article.
  • To enhance the precision of the study, future research may wish to examine the change ratio of the fitted ellipse shape under varying roughness parameters in greater depth, as well as the specific occlusion ratio between different wave peaks.
  • Firstly, the neural network model is employed to categorize the grinding surface, and subsequently, the specific value of the roughness is calculated in accordance with the index function.
  • A research team from the Korea Advanced Institute of Science and Technology (KAIST) has developed a visual technique that allows users in virtual reality (VR) to perceive the roughness of objects without haptic devices.
  • In many setups, one user may possess a haptic device that delivers vibrations to the fingertips, allowing them to feel an object’s texture, while a partner without such hardware must rely solely on visual cues.

Lean Quality Improvement Reduces ICU Medication Waste by Nearly Thirty-Two Percent

To enhance the precision of the study, future research may wish to examine the change ratio ChatGPT of the fitted ellipse shape under varying roughness parameters in greater depth, as well as the specific occlusion ratio between different wave peaks. Firstly, the neural network model is employed to categorize the grinding surface, and subsequently, the specific value of the roughness is calculated in accordance with the index function. This phenomenon indicates that the self-affine texture noise is not readily eliminated by our method at the micron scale due to the fluctuation of the self-affine texture similarity ratio in the region with relatively weak texture features. Nevertheless, it is evident that the precision of the index function prediction exhibits fluctuations within the narrow range of roughness levels, spanning from 0.3 ?m to 0.5 ?m. Table 6 illustrates that the average relative error between the predicted value and the measured value of the indicator function remains below 5%, thereby demonstrating that the proposed indicator relationship exhibits satisfactory detection performance.

KAIST virtual roughness study

FPV Pro Flash Point Analyzer for Accurate Liquid and Solid Testing

The specific values of the roughness parameters of the sample block to be tested are then predicted through the pictures of the sample block according to the corresponding index functions. G1, G2, G3, G4 represent the level of roughness, F1, F2, F3, F4 represent https://aicurated.com/ the index function fitted according to the workpiece with different roughness levels. Due to the random texture characteristics of the grinding surface, Machine learning the shape of the fit ellipse is changeable, and the occlusion ratio between different wave peaks is not fixed. In Section 2.2, it is introduced that this article employs the ellipse fitting algorithm to fit the peaks. In this table, MRE represents the average relative error between the crest point and the fitted ellipse. After fitting and analyzing the grinding surfaces with different roughness parameters, the errors of the aforementioned mathematical model for various roughness surfaces are obtained in this paper, and the detailed data are shown in Table 1.

Advertisement